Colouring PVC and plastic windows

 

For colouring windows from PVC, glass-fiber plastic, aluminium, many years with sucsess employed polyurithane enamel Redox PUR Sikkens and Interthanе 990 International РС. The enamels polyurуthane have earned an established reputation as an exelent external decorative coating.

In contrast to alkyd enamel and epoxy enamel, polyurethane enamel not disposed to change the color or chalking. This coating, side by side an exelent external view, its inert to all athmospheric influence, temperature fall, sun ultraviolet. With polyurethane enamels can also recolour in any choosen colour already laminated surfaces.

And here is another quality of colouring PVC - profile enamels polyurethane   - colouring and recolouring in choosen color of the windows which were already mounted and the windows which exploit even for a long time, without taking off them. With use of   portable turbocompressor unit   HVLP 3800  GRACO, it is possible to colouring with minimum losses enamel, as outside of the windows and inside. Minimal fogging and respraying makes protection of glasses easy enough.

The colouring process PVC  ПВХ-surfaces is extrimely simple. making of microroughness with sticky-tape-bright (volume abrasive material), degreasing surface solvent and colouring enamel polyurethane. And that's all! Drying up to detouchment, colouring temperature is 25 C, time is 20 min, in 1 hour product dries 3rd degree. In 4 hours product can turm over. In twenty-four hours the product can be put in place.

 

Product name
Discription
Dry residue
%
Dry film thickness, micron
Theoretical coverage
 m2/l
External polyurethane coating
57
50
11,40

 

 
Product name
Discription
Dry residue
%
Dry film thickness, micron
Theoretical coverage 
m2/l
Redox PUR 3355
Exterior
polyurethane  
semi-gloss coating
57
40
14,2